1.5U Front Solar Panel

Part number: SP-SJ-F1.5U-0026-CS

1.5U CubeSat Front High Efficiency Solar Panel

  • High quality PCB Substrate with space-grade Kapton coverlay
  • 2 large area triple junction cells with 28.3% efficiency minimum
  • Temperature sensor, reverse bias protection diodes and harness connector
  • Compatible with CubeSatKit structure (ISIS [and other]structure version available on request)
  • Manufactured to Clyde Space qualified, flight heritage processes using space grade materials
  • Other sensors available for inclusion on solar panel (i.e. coarse and fine sunsensors). Magnetometers and/or rate sensors can be included, but we advise that these are placed in a more thermally benign location due to the device temperature coefficients.
  • Also available with integrated magnetorquers
  • All manufacturing at Clyde Space is to our ISO9001:2008 accredited processes by our ESA trained assembly staff (see our Quality Manual)
  • Solar_Panel_Datasheet
  • 3D model available on request.
Performance parameters for this solar panel ('Front' panel has an aperture for connector access):
1.5U Fronth5>
BOL Voc at -40°C (V) 6.13
BOL Vmpp at -40°C (V) 5.58
BOL Vmpp at 80°C (V) 4.02
BOL Vmpp at 28°C (V) 4.70
BOL Power at -40°C (W) 2.46
BOL Power at 80°C (W) 1.79
BOL Power at 28°C (W) 2.08
Mass 1.6mm PCB no MTQ (g) 45
Mass 1.6mm PCB w/ MTQ (g) 54
Mass 2.4mm PCB w/ MTQ (g) 72
Magnetic Dipole 1.6mm PCB w/ MTQ (Am2) 0.114
Magnetic Dipole 2.4mm PCB w/ MTQ (Am2) 0.139
Add to basket