E-Newsletter


CubeSat Top/Bottom Solar Panel w/MTQ

Part number: SP-L-T1U-0017-CS-MGT
Cost:$3,000.00

High Efficiency CubeSat TOP/BOTTOM Solar Panel with Magnetorquer

  • High quality PCB Substrate with space-grade Kapton coverlay
  • 2large area triple junction cells with 28.3% efficiency minimum
  • Temperature sensor, reverse bias protection diodes and harness connector
  • Compatible with CubeSatKit structure (ISIS [and other]structure version available on request)
  • Manufactured to Clyde Space qualified, flight heritage processes using space grade materials
  • Other sensors available for inclusion on solar panel (i.e. coarse and fine sunsensors). Magnetometers and/or rate sensors can be included, but we advisethat these are placed in a more thermally benign location due to the device temperature coefficients.
  • Magnetorquer contained on internal layers of PCB substrate (magnetic moment depends on PCB thickness, no. turns, current, etc.)
  • All manufacturing at Clyde Space is to our ISO9001:2008 accredited processes by our ESA trained assembly staff (see our Quality Manual)
  • Solar_Panel_Datasheet
Parameter
Units
TOP Panel
BOL Voc at -40°C (V) 6.13
BOL Vmpp at -40°C (V) 5.58
BOL Vmpp at 80°C (V) 4.02
BOL Vmpp at 28°C (V) 4.70
BOL Power at -40°C (W) 2.46
BOL Power at 80°C (W) 1.79
BOL Power at 28°C (W) 2.08
Mass 1.6mm PCB no MTQ (g) 42
Mass 1.6mm PCB w/ MTQ (g) 44
Mass 2.4mm PCB w/ MTQ (g) 60
Magnetic Moment 1.6mm PCB w/ MTQ (Am2) 0.08
Magnetic Moment 2.4mm PCB w/ MTQ (Am2) 0.102

Website under reconstruction, dummy icon represented below.

CubeSat End Solar Panel 3D model User Manual
Add to basket