Clyde Space 3U Front Solar Panel w/MTQ, CubeSat ADCS CubeSat

3U Front Solar Panel w/MTQ Bare PCB w/Kapton face

High quality PCB Substrate with space-grade Kapton coverlay
(7 cell version available on request for panels with a smaller fee-through aperture; note, image shows a side panel, which does not have a cut-out for wire feed-throughs)
Temperature sensor, reverse bias protection diodes and harness connector
Compatible with CubeSatKit structure (ISIS [and other] structure version available on request)
Manufactured to Clyde Space qualified, flight heritage processes using space grade materials
Other sensors available for inclusion on solar panel (i.e. coarse and fine sunsensors). Magnetometers and/or rate sensors can be included, but we advisethat these are placed in a more thermally benign location due to the device temperature coefficients.
Magnetorquer contained on internal layers of PCB substrate (magnetic moment depends on PCB thickness, no. turns, current, etc.)
All manufacturing at Clyde Space is to our ISO9001:2008 accredited processes by our ESA trained assembly staff (see our Quality Manual)
Solar_Panel_Datasheet

3D Model Available on request.